Cedar
Privacy boards in cedar, with a warmer color that weathers if you leave it bare.
Fort Worth and nearby
1 Fencing
Residential and commercial fencing from a Fort Worth crew. Wood, cedar, iron, vinyl, chain link, ranch runs, gates, repairs, and stain. We measure the line on site, then you get a real price.
Owned by Peter Flores, who also owns Bandit Roofing and Bandit Sheds.
What we build
Homes, shops, and small commercial lots. New runs, a gate that matches, a repair on the stretch that failed, or stain on wood you want to keep.
Where most backyards start
Solid boards for a backyard you can sit in. The fence most Fort Worth yards start with.
Price a rough rangeA fence is a long, thin building. The posts decide whether it stays put.
Privacy boards in cedar, with a warmer color that weathers if you leave it bare.
A lower, open fence for a front yard. Spaced boards with pointed or dog-ear tops.
A metal line you can see through. A steady choice for frontages and open edges.
A practical fence for pets, side yards, and commercial lots. Privacy slats are an option.
Smooth panels if you would rather not stain wood down the road.
Pipe, wire, and rail for larger lots, pastures, and the edge of town.
Walk gates and drive gates that match the fence, with hardware that latches.
Leaning posts, broken boards, a gate that drags. A stretch can be fixed without replacing the run.
A fresh coat on a wood fence you want to keep. We look at the wood before picking a color.
Rough range
Pick a fence, a height, a length, and how many gates. The range uses preliminary DFW installed prices. It is not the price we will build for.
Gates
Walk or drive openings
Rough price range
$3,350–$5,840
Estimate only. Final price after a free on-site measure.
120 ft of wood privacy at 6 ft, plus 1 gate. About $25–$42 per foot before height and gates. Old-fence removal, slope, and rock are not in this range.
Get a free estimateHow it works
Fence type, about how many feet, and the address. A note is enough to start.
The visit is free. We look at slope, gates, and whatever fence is already standing.
Materials and the work, written down, before we build anything.
Posts set, lines straight, and gates that swing the way they should.
Service area
We build in Fort Worth and the nearby cities below. If yours is not listed, email us. The drive might still be reasonable.
Questions
Send the form, or email info@1fencing.com, and we set a time to measure. The visit is free. The number we give you after that visit is the price for the work we talked through.
A rough range from preliminary per-foot prices for a straight run, plus a typical gate. It does not include taking out an old fence, a steep slope, or rock. Estimate only. Final price after a free on-site measure.
Yes. Houses, shops, and small commercial lots. Tell us what the fence is for when you write, so we bring the right questions.
Often, yes. Leaning posts, missing boards, and a gate that drags can be a repair instead of a whole new run. We will say so if the wood is too far gone.
Walk gates and drive gates, matched to the fence beside them. Count each opening when you use the estimator.
Fort Worth and the nearby cities listed on this page. If you do not see your town, ask. We will tell you if the trip makes sense.
It helps if someone can walk the line with us, especially where a gate should go. If that is hard, say so in your note and we will work out a way to see the yard.
Some places cap height, or ask for the finished side to face out. We will talk through what fits your lot when we measure, before anyone orders material.
Free estimate
Name, a way to reach you, and where the fence goes. We will write back about a time to measure. The form opens an email to info@1fencing.com. Nothing from this form is stored on the website.